Lighting integrations for Ecophon Focus™

Which one you should use depends on:

• the ceiling system
• the fixing solution
• how big load the panel can carry

Suspended luminaires

Suspended luminaires can be used for all Ecophon suspended ceiling and direct fixing installations. When using suspended luminaires for suspended ceilings, we recommend using Connect Light fitting clip when installing the luminaire to the grid system with a wire. 

 

Downlights

Downlights can be used for all Ecophon suspended ceilings, but please note that the panels can only carry small loads. You can learn more about this in the Mechanical properties section. We recommend using Connect Bridging for downlights, since this unique solution transfers the weight of the luminaire to the grid system, meaning that there will be no loads on the panel. 

 

Recessed luminaires

Recessed luminaires can be used on all Ecophon suspended ceilings, but it´s crucial to choose a luminaire that fits the ceiling type (see recommendations below).

 

Recommended luminaires for different Ecophon ceiling systems

Focus A: 20 mm ceiling tile, visible grid, easy demountable tiles. Recommended luminaires for Focus A                 

Focus Dg: 20 mm ceiling tile, unique edge design, floating appearance, easily demountable tiles.
Recommended luminaires for Focus Dg

Focus Ds: 20 mm ceiling tile, concealed grid, easily demountable tiles, symmetric edge.
Recommended luminaires for Focus Ds

Focus E: 20 mm ceiling tile, recessed visible grid, easy demountable tiles.
Recommended luminaires for Focus E

Focus Lp: 20 mm ceiling tile, semi-concealed grid system used for highlighting direction in a room.
Recommended luminaires for Focus Lp

 

For the below direct fixed ceiling types, we recommend using a suspended luminaire:

Focus B: 20 mm ceiling tile, for direct fixing with glue   
                                    

Focus F: 20 mm ceiling tile, for direct fixing with screws 

 

Focus SQ: 20 mm ceiling tile, for direct fixing with glue